Some advice about increasing the magnetic separation efficiency of magnetic separator-1

The magnetic separator is one of the mining equipment. It is the main equipment in the production line of magnetic separation. The efficiency of magnetic separation is the hot issue for manufacturers and users. How to increase the efficiency is very important technological problem. There is some advice from NHI.
1. The usage of machine for blending material
The magnetic separator completes the magnetic separation through the magnetic force. If the material layer is thick, the effect of magnetic separation will be bad. So the users could increase the magnetic separation efficiency through the machine for blending materials.
2. The height adjustment of material distribution board
The height of material distribution board influences the effect of magnetic separation. When the height of material distribution board is low, the lean magnetite could not recycled better, reducing the use ratio of ore resources. When the height of material distribution board is high, the gangue mineral could not be fully casted, influencing the effect of magnetic separation. So the users should adjust the height of material distribution board to the best location, getting the best magnetic separation efficiency.
3. Adjusting the distance between material distribution board and magnetism barrel
Experiments have shown that smaller distance between material distribution board and magnetism barrel result in lower recovery rate of lean magnetite, greatly reducing the use ratio of ore resources. The distance adjustment could help the gangue be fully casted, ensuring the recovery rate of dry separation.

评论

发表评论

此博客中的热门博文

The Comparison of Portal Scraper Reclaimer and Boom Scraper Reclaimer

图片
The portal scraper reclaimer and boom scraper reclaimer are the main types. The differences are as follows: 1. The portal reclaimer has reasonable structure. The partial weight of portal frame and scrapper reclaimer is supported by the wall(blocking materials). In this way, the stress state under the central cylinder, and the running of the portal scraper could operate smoothly. And the boom scraper reclaimer's load could be transmitted to the central cylinder. In this way, the design and manufacturing difficulty is large and the stability of the equipment is bad. 2. The portal reclaimer has compact structure, and there is no need to design the balance weight. The space occupied under the portal reclaimer is small. The boom reclaimer should be designed with large balance weight. 3. The portal reclaimer need the circle track in the wall(blocking materials), and the related cost of setting circle track. The balance weight load of the boom scraper reclaimer is central under t
阅读全文

The Analysis Of Advantages And Disadvantages On Boom And Portal Bucket Wheel Stacker Reclaimer

图片
As we all know, the stacker reclaimer coordinates with belt conveyor to complete the handling process of materials in most conditions. The bucket wheel stacker reclaimer, as one of the mining equipment , is mainly used in handling materials. According to the structure form, there are boom bucket wheel stacker reclaimer and portal bucket wheel stacker reclaimer. The boom bucket wheel stacker reclaimer is widely used in port, coal storage yard, earthwork, coking plant, cement plant and etc for handling coals, ores, and other materials. The portal bucket wheel stacker reclaimer is mainly used in power plant. The boom bucket wheel stacker reclaimer handles materials through the rotation. So it is necessary to set the large rotating bearing, which increases the cost. The portal bucket wheel stacker reclaimer handles materials along the straight line without the large rotating bearing, which could save the cost. The boom bucket wheel stacker reclaimer could handle materials over 90 d
阅读全文

The Features Of Different Apron Feeder

图片
In general, the apron feeder could be divided into three types including heavy, medium, light type, which is the continuous transportation machinery widely used in mining, metallurgy, construction materials, ports, coal and industrial and mining enterprises. The apron feeder is mainly used as the storage bunker to continuously supply the materials or transfer large material to crushing machine or batching apparatus. The apron feeder is one of necessary machine for handling materials in the process of continuous production. Sometimes some EPC companies would choose stacker reclaimer, belt conveyor, stone crusher and etc to complete the transportation of materials. The light apron feeder is suitable for transporting materials under 160mm granularity in short distance. It is used for continuous feeding in mine, mill plant, chemical industry, cement, building materials. The light apron feeder could be installed horizontally or obliquely. The maximum inclination degree is 20, which is su
阅读全文