The attentions of waste treatment using rotary kiln
Rotary kiln is widely used in the field of industrial waste treatment. It can handle solid and liquid waste. The solid waste is transported by the special transport equipment into the rotary kiln, while the liquid waste is through the efficient atomization equipment into the kiln's feeding end.
With the country's increasing requirement for environmental protection, burning waste by rotary kiln has been widely used. However, in the process of incineration, the fault in any one part will cause excessive emissions of pollutants, thus affecting the environmental performance of rotary kiln. In the calcination process, the necessary details should be vigilant.
First, the rotary kiln's feeding temperature and the out-feeding temperature must be controlled.
Second, the carbon monoxide content and exhaust pressure in the rotary kiln must be measured at any time.
Third, the rotary kiln's feeding amount should be controlled. If the amount of raw meal is less than 75% of the maximum amount added, the worker needs to increase the amount.
Fourth, if the excessive dust emission of the rotary kiln exceeds the allowable limit, this could be resulted from fan or rotary kiln burner failure. We should pay careful attention to each related equipment for detailed testing.
In generally, the rotary kiln coordinates with other equipment such as crushing machine, apron feeder, belt conveyor, stacker reclaimer, and etc. to complete one production line. We should pay attention to details about all the equipment.
With the country's increasing requirement for environmental protection, burning waste by rotary kiln has been widely used. However, in the process of incineration, the fault in any one part will cause excessive emissions of pollutants, thus affecting the environmental performance of rotary kiln. In the calcination process, the necessary details should be vigilant.
First, the rotary kiln's feeding temperature and the out-feeding temperature must be controlled.
Second, the carbon monoxide content and exhaust pressure in the rotary kiln must be measured at any time.
Third, the rotary kiln's feeding amount should be controlled. If the amount of raw meal is less than 75% of the maximum amount added, the worker needs to increase the amount.
Fourth, if the excessive dust emission of the rotary kiln exceeds the allowable limit, this could be resulted from fan or rotary kiln burner failure. We should pay careful attention to each related equipment for detailed testing.
In generally, the rotary kiln coordinates with other equipment such as crushing machine, apron feeder, belt conveyor, stacker reclaimer, and etc. to complete one production line. We should pay attention to details about all the equipment.
评论
发表评论